Recent News

CARPOW’s Plan In 2018

For Jump Starter, we will concentrate on D50, K6 and K30, and make regular stock for those three models. As per sales record, totally 100,000pcs jump starter were sold out, they took up 80%, that’s w...…

Continue Reading

Value of Solar Generator

Hot TV Series <Revolution> tells us such a story: One day power on earth runs off completely, the world falls into a super mess and human being can not survive without power. To strive for surviving,...…

Continue Reading

Green Power Source-Solar Generator

Solar product has been very popular in the past few years and still keeps hot, solar is considered as unlimited green power source, that’s why we try our best to develop more and more products to us...…

Continue Reading

Portable Solar Power Generator

We are definitely sure that solar power generator will be more and more popular, as people prefer to take outdoor activities in their spare time, and clean energy are also the developing trend in most...…

Continue Reading

Company News

Location:Home > News & Resources > Company News

How to Use CARPOW Jump Starters?

Date:2016-03-20 Hits:1169
During bad weather or when the car battery is short in power, this product can help jump start your vehicles. Before using this product, please read the user manual carefully and use it correctly according to the instructions to avoid any danger or inconvenience.

Jump Start Steps:

Step 1: Connect red clamp with vehicle battery’s positive (+) terminal and black clamp with the negative (-) terminal
Step 2: Plug the cord of the jumper cable into the jump starter socket
Step 3: Start the Vehicle
Step 4: Remove the jumper cable from the vehicle battery and jump starter

Important Notices When Jumpstarting Vehicles:

a. Make sure the remaining power in the jump starter is above 50%

b. When the vehicle battery is totally empty in power, please disconnect the negative terminal of vehicle battery and jumpstart the engine directly with the jump starters. (This operation is not recommended if you are not familiar enough with your vehicle and you should consult with professionals)

c. Remove jumper clamps from vehicle battery within 30 seconds once engine started

d. Never reverse connect the jumper clamps with the vehicle battery or connect the red clamp with the black clamp

e. Never jump start 12V cars or motors with 24V output

f. Please wait for at least 15 seconds if need to jump start a second time

How to Charge Mobile Phone, Tablet or Other Electronic Devices?

Step 1: Insert the USB cable into the 5V USB output port

Step 2: Connect the USB cable to the mobile phone/tablet/other electronic devices

Step 3: Turn master switch to ON (if applies) and press on power button to begin charging

Step 4: Once the device is fully charged, the jump starter will cut off charging; if need to charge again, please press on power button again

How to Charge Laptop (Only for some model)?

Step 1: Choose suitable adaptor

Step 2: Connect the cable to the product’s output port

Step 3: Connect the cable with laptop by using the chosen adaptor

Step 4: Turn master switch to ON and press on power button to choose the suitable output voltage; once done, it will begin charging

How to Use the Torch?

Step 1: Turn master switch to ON (if applies)

Step 2: Press on power button for 3 seconds to turn on torch function; press again to turn on SOS mode; press again to turn on flashing mode; press for another 3 seconds to turn off

Step 3: Press power button twice to turn on the warning lights function (only for some models); press again to turn off

How to Charge the Jump Starter?

Step 1: Connect the attached power adaptor/car charger/charge cable with jump starter’s input port

Step 2: Connect the power adaptor/car charger/charge cable with the power source; the power indication lights will begin flicking, which means it is charging

Step 3: Once fully charged, the flicking will stop